[Challenger]

Originally Posted by Roaddog53

Rule 16

Requirements for Hole Location on the Putting Green

Q. What are the requirements for establishing a hole location on the putting green?

A. The USGA frequently receives requests for guidelines with respect to selection of hole locations on the putting greens, particularly during competitions. There are no rules regarding hole locations, so there is no such thing as an "illegal" hole location. The USGA believes that many factors affect selection of hole locations. The first and most important is good judgment in deciding what will give fair results. Do not be tricky in locating holes. Following are specific points:

Study the design of the hole as the architect intended it to be played. Know the length of the shot to the green and how it may be affected by the probable conditions for the day - that is, wind and other weather elements, conditions of the turf from which the shot will be played, and holding quality of the green.
There must be enough putting green surface between the hole and the front and the sides of the green to accommodate the required shot. For example, if the hole requires a long iron or wood shot to the green, the hole should be located deeper in the green and further from its sides than should be the case if the hole requires a short pitch shot. In any case, it is recommended that generally the hole be located at least four paces from any edge of the green. If a bunker is close to the edge, or if the ground slopes away from the edge, the distance should be greater, especially if the shot is more than a pitch. Consideration should be given to fair opportunity for recovery after a reasonably good shot that just misses the green.
An area two to three feet in radius around the hole should be as nearly level as possible and of uniform grade. In no case should holes be located in tricky places, or on sharp slopes where a ball can gather speed. A player above the hole should be able to stop the ball at the hole.
Consider the condition of nearby turf, especially taking care to avoid old hole plugs which have not completely healed.
Holes should be cut as nearly on the vertical as possible, not plumb with the contour of the green.
There should be a balanced selection of hole locations for the entire course with respect to left, right, central, front and back positions. For example, avoid too many left positions with resulting premium on drawn or hooked shots.

All of this means that the person placing the hole needs to have a basic understanding of the game and good judgment. currently every principle addressed by the USGA statement is being ignored frequently.