Quote:
Originally Posted by villagetinker
Replacing the sensor may not work if your lamp post is shaded. I have noticed some of the neighbors come on earlier and later than ours, and it appears to be dependent on the direction the sensor is pointed and shading. IMHO, take a look at the general direction of your neighbors lamp ost sensors in relation to yours, and double check for any shading.
Hope this helps.
|
IF you have the tools and are handy, it is possible to put in a new sensor in a different position like your neighbors and then plug the old hole with a hole cap/plug from the hardware .....OR buy a bulb that burns cheaply and will last 20 plus years and forget about it.......
