When you turn the dial to the solar sync setting, the number on the left side of the screen should be set on 3. That is a regional setting for Florida. The number on the right side is a calibration number that can be set from 1 to 10, depending on how well the solar sync is adjusting the watering times. But, the builder usually sets it at 10. The seasonal adjust setting should be set at 100 percent when you initially set the watering times or when you change the times. The solar sync sensor will automatically change the seasonal adjust percentage from 5 to 300, based on the weather conditions. This will increase or decrease the actual watering times. For example, if the percent goes down to 50, the watering times will be cut in half. However, my system has never raised the seasonal adjust percentage above 100 percent.
|