Quote:
Originally Posted by Bobs GolfCart Speedometer
Your garage door controller wall station has learned a neighbor's transmitter (remote opener) code. This problem has happened to me and several of my neighbors over the years. We all have the MVP Allstar garage door opener system, which is widely used in The Villages. There's a procedure for erasing the codes currently stored in the wall station's memory and then re-learning ONLY your remote's code. I've re-programmed several of these for my friends and neighbors. If you'd like to learn how to do-it-yourself here's a link to the Manual for this unit.
http://www.linearcorp.com/pdf/manuals/111069FX1.pdf
Page 12 has the instructions for erasing and re-learning transmitter codes. You'll also need to re-program your Wireless Keyless Entry keypad. Here's a link to the manual for doing that.
http://www.linearcorp.com/pdf/manuals/111214B.pdf
In the meantime you can disable the opener by moving the switch located near the bottom of the controller to the "locked" position. |
THIS IS IMPORTANT: You must erase all old codes in the receiver (see page 12) or the problem will continue, even if you add a new code. Read and follow the instructions.
The first time I changed the code in the receiver I did not erase the old code(s) so the problem continued.