Quote:
Originally Posted by kappy
Never change lanes between the 2nd and 3rd exits. The broken white line dividing the inner and outer lanes does not mean you may change lanes while inside the roundabout. The broken white line is there so that vehicles entering the roundabout can enter in either lane, depending on where they are going.
A vehicle entering a roundabout that is going 3/4 around, must be able to enter in the left hand lane, thereby crossing the broken white line. This is the same as if they were at a traffic light and were going to make a left hand turn onto a 4 lane road. Once you enter the road in the left lane, you can change lanes to the right lane. Approximately 30-40% of all drivers make this error by directly entering the right lane. (This information comes from “Professional Driving With Richard” that used to be printed in The Villages Homeowners Association monthly newsletters).
I have sent emails to Mrs. Tutt suggesting that the signs as you enter any 2 lane gate should indicate that the “Visitors” gate should read, “Residents and Visitors”. That is one of the reasons that residents can enter the visitors gate with their gate card.
|
Too many folks believe that since they are residents, that they should always go through the resident gate. They change lanes in the middle of the roundabout, crossing from the inner to the outer lane. This is an unsafe maneuver.
Friends - it is ok to enter through the visitor gate. I do it all the time when I am in the inner lane of the roundabout. Simply stay there and use the left exit lane to the gate. This is the proper and safe thing to do.
If you don't agree with me, please take a look at the brochure. It clearly shows the proper exit from the inner lane.
Thank you for your attention.