Quote:
Originally Posted by villagetinker
OK, not a GC expert, but i have worked on a lot of cars. Try some spray carb cleaner, also, many small engines have a float in the carb. As I recall these can be accessed by dropping the bowl. Check for dirt where the needle valve is located, try spraying carb cleaner in this area. You might want to see if you can get a rebuild kit, as the needle valve may have failed, allowing excessive gas to accumulate.
Hope this helps.
|
Spraying carb cleaner will not help, and there is never a need for a rebuild kit. The parts that are in the kit, never wear out.
If the needle was not working, it would fill the motor with fuel. We do see this quite a bit, but it is an easy fix. On Club cars this is rare.