Quote:
Originally Posted by rjm1cc
Use a lever. Say a small block of wood and place a screw driver under the lip and the shaft of the screw driver on top of the block of wood and push down on the handle. May work in the middle of the window but you may have to do both ends at the same time. This might be a one time problem. Once you get it open clean the tracks and maybe use some wax to lubricate.
|
I used this method, placing the screwdriver on the lip at the bottom frame of the glass. Be careful and don’t push in as you levering it is out of the seal. Once out of the seal ( about 1/2 it should slide up with just you’re hands? I doubt it painted over, but if it is you need to break the seal with razor knife.