[BRN_RI_FL]

Originally Posted by villagetinker

These windshields are typically a plexiglas type material which can be glued using acetone or a glue specific for plexiglas. i have also had very good luck with GOOP. The advantage of GOOP is it remains flexible, it is a clear contact cement. NOTE: be very careful that you do not get excess glue on the tracks of your slider. I could give you a hand if you are not comfortable doing this yourself. Send a PM if you would like help. I typically have both acetone and GOOP on hand.

Thanks for your usual helpful post. I should be back in The Villages after Christmas. I’ll let you know if I need help.