Talk of The Villages Florida - View Single Post - Billiard Table
Thread: Billiard Table
View Single Post
 
Old 04-29-2020, 04:12 PM
Topspinmo's Avatar
Topspinmo Topspinmo is offline
Sage
Join Date: Dec 2012
Location: Somewhere over the rainbow
Posts: 15,023
Thanks: 7,542
Thanked 6,220 Times in 3,201 Posts
Default

Is it’s already assembled? If not you level each section as you assemble it. If assembled roll striped ball slowly down the side long rails, see which way ball Moves. If you line the stripes up sideways You I’ll see it start to wobble one way or the other and the ball will track off one direction. Slowly means just fast or slow enough for the ball to touch end rail.

Note that direction down the rails and roll it cross corner to corner long ways. You have good idea Which side low or high. The Long level should show this also. As mentioned if no leg adjusters you have to shim up which ever side is low. I use to use it pieces of Card board paper. If on carpet you’ll have to check it several times till the table settles. Shim till the ball will roll straight 2” off rail providing you hit exactly center of the ball.

Last edited by Topspinmo; 04-29-2020 at 06:17 PM.