Thread
:
Electrical question--help !
View Single Post
10-04-2020, 06:43 PM
Tsmart
Junior Member
Join Date: Jun 2017
Posts: 15
Thanks: 1
Thanked 13 Times in 7 Posts
If it's a single pole switch, (black wires to both screws on one side only) cut breaker, remove both wires and wire nut them together. Then turn breaker on. If your light goes on you have a bad switch. I did exactly this TODAY.
Tsmart
View Public Profile
Send a private message to Tsmart
Find all posts by Tsmart