[Topspinmo]

Originally Posted by worahm

If the GFI outlet is not working, push the reset button. If the GFI does not reset, there may be a ground fault in the circuit or the GFI outlet is defective. Unplug any appliance that is plugged into the circuit that may be causing the ground fault and push the reset button again. If it does not reset, and the GFI outlet has been in use for more then 6 or 7 years, it has exceeded it's life expectancy and is probably defective. GFI outlets mounted outside are more prone to early failure. There are GFI's that are designed to be used outside. Be certain to replace the defective GFI with a GFI of the same amp. rating. Usually 15 or 20 amps depending on it's location. Each wire must be connected to the proper terminal screw. Move one wire at a time to the same terminal on the new GFI. Be certain to turn off the circuit breaker before you touch the wires and read the directions before you move the wires. If you have never replaced a GFI, taking a photo of the wiring on the defective GFI may be a good idea. If you can read, rewiring a GFI is not rocket science.

I never touch neutral or hot wire at same time unless the main circuit breaker tripped. Especially when for more that single wire harness going into outlet.