Quote:
Originally Posted by philoret
Caution: there are two versions one cheap around $10 which has been found not durable; look for the one more expensive around $13. Both were in Ace hardware stores (in the Villages, where they are used, e.g. next to Publix on 466 opposite the High School).
Store clerks know the part for The Villages light poles.
You might need a volt meter to identify the correct breaker if not labeled on the box, unless checking at night when the lamp is on -- it is usually not possible to test these sensors during the day, as light leaks by and there is time delay.
|
Most inspectors use duct tape or and piece of putty to cover the sensor. The light will come on in a few minutes if the sensor is covered.