If your brake lights and turn signals do not work. The first thing I would do would be to check the tail light bulbs. The tail light bulbs are 2 filliment bulbs one is used for your tail lights the other is used for your brake lights. If you don't have a tester I would just go down and buy 2 new bulbs #1157 is usually what they use.
Usually the fuse on that circuit controls your: Headlights, Turn Signal Lights and Brake Lights. So if you have headlights I would say the fuse is OK.
Note that if both brake light bulbs are burned out there isn't enough voltage left in the circuit to flash the turn light flasher.
Another way to check it out would be to turn on your turn signals and see if the front turn signal light bulb lights up, if it does then that tells you that the rear bulbs are burned out.
Hope this helps you out
Eddie
|