Quote:
Originally Posted by Tom52
Thanks for the information, so if replacing an expansion tank, should the tank be charged to 60 psi or 40 psi? I don't see an easy way to determine the system pressure to be able to match it in the expansion tank.
|
In The Villages your water pressure varies. We check this on every inspection. You can use a pressure gauge on one of your hose bibs.
Most of The Villages around the middle and upper part the water pressure is typically around 50 psi.
In the newer areas, (like Fenney, DeSoto, etc.), it is about 70 psi. In the newest areas, like Bradford, Chitty Chatty, etc it is a bit closer to 60 psi.
Hope this helps!