Quote:
Originally Posted by Fastskiguy
Nope, same. White wires not going anywhere the same as in the other switch. Does this help us?
|
Just some basics here.
A switch typically only switches the black wire.
A 3-way has two black wires and a red wire. The red wire goes to a different switch to allow either switch to turn on or off the item.
Your motion light is a device that requires power so it needs the black and white(Hot/neutral) and also needs to be grounded(bare).
First things first, you need to wire your motion switch into a white wire. THIS MUST HAPPEN. Do not leave the white wire attached to the ground(bare) wire.
As it appears you did not get a 3-way capable motion switch you're out of luck with the red wire. Either get one or cap the red off and abandon using the other switch.