Quote:
Originally Posted by JoelJohnson
He was talking about torsion springs.
|
I realize that just an example if nothing is wrong with the torsion spring why replace it or will it be something to worry about and replace maybe every 5 years
I found this from a garage door mfg site
Top reasons why garage door springs break
Wear and Tear
By far the biggest reason for garage door spring failure is simple wear and tear. Most springs are engineered and rated for about 10,000 cycles – one cycle being the garage door going up and coming back down to close. That may seem like a lot, but consider that you go through a minimum of two cycles a day just getting the car out of and back into the garage. If you go on any errands, a spouse goes to work through the same garage, or kids open and close the door for any reason, those daily cycles can add up a lot faster than you may think. If you garage door has become your “front door” and receives excessive use, it might be smart to consider getting extended lifespan torsion springs, which are rated for 20,000 or more cycles.
Rust
If any rust develops on the spring for any reason, its lifespan will be dramatically shortened. Rust increases the amount of friction on the coils while it moves back and forth. Addition, the corrosion on the spring itself will weaken the coils and lead to failure more quickly. Spraying down the spring with a silicone-based lubricant three or four times a year can greatly assist in keeping it well lubricated and extend its life expectancy.
Improper Maintenance
All garage door springs will fail eventually, but proper maintenance can not only prolong the lifespan of the springs, but alert you when they are getting close to failure. The can help prevent potentially destructive explosive breaking of the spring as well as the headache involved with fixing it as quickly as possible. In addition to lubricating the spring with white lithium grease a few times a year, check the garage door balance at least once a season, especially in the winter when most springs fail. To check balance:
Pull the emergency release cord (it has a red handle) to place the door in manual mode.
Lift the door up halfway and let go of it. Springs in good working order should keep it completely still; if the door sags and falls a bit, the springs are starting to show signs of wear and may need adjustment or replacement.
We highly advise broken garage door spring repairs be performed by professional technicians who possess the proper training and tools to complete the job safety.