I have 900 sf of 2 1/2 inch thick brick pavers. I get them sealed every five years. I hire someone to "surface wash" the pavers (not powerwash) for about $70. I then wait three days (sunny) for them to completely dry. I then apply the solvent based sealer myself. Which will take two coats. You can buy this sealer at Lowes. It's about $120 for a five gallon drum. I needed two drums. You must watch the weather forecast and make sure it will not rain for at least 24 hours after the second coat. Cars must stay off of the new sealer for 48 hours.
Your going to get some real high estimates. One guy wanted $1,300 for the whole job. Which is why I did a DIY project. Was not hard to do. So if your able, do it yourself and save the money. Plenty of YT videos out there to help you out.
|