[TrudyM]

If you decide to do it yourself. For the doors. take any container with a square corner that you can cut two sides off of. . I used a plastic one I had in the bin but anything will do. measure carefully and drill the hole in the first door. Push your containers corner up on the door and drill from the back of the door through the container. Now you can put this on every door and use the hole as a pilot so they all come out the same. Did that make sence. The jig that you mentioned can be bought online and Home Depot has one but I found mine easier to use. Just me. This is my 5th total house remodel and my last I hope.