Quote:
Originally Posted by villagetinker
You will need to remove the bottom panel, 4 bolts, I forget the size/type. This panel hooks around the frame on one end. Once this is down, there is a rubber 3 inch by 6 inch duct from the muffler to the pan you just removed. Take this off and you will see the spark arrestor. I found that jacking up the front of the cart (and then supporting it correctly), gives you a lot more room the work. Hope this helps.
|
thanks, VT. When I do mine I'm going to hang on to the arrestor and if I don't like the change in the sound, I might soak it in carb cleaner and replace it.