Quote:
Originally Posted by n8xwb
I have had several of my push/pull shutoff valves shutoff and have to be reset. I have read numerous posts over the years talking about checking water pressure, install new, better valves, etc. Years ago I decided to try a cheap almost free solution:
I drilled a small hole in the plastic valve and secured the valve in the on position (pushed in) using a plastic cable tie. This has worked perfectly on multiple valves. Of course, you will need to keep a supply of spare ties because, when/if you need to turn off the valve you must cut and remove the tie! See attached photo.
|
I would not recommend this. Also, I would not recommend replacing a fuse with a piece of wire.