Talk of The Villages Florida - View Single Post - Missing adjustment screws in an adjustable door threshold
Thread: Missing adjustment screws in an adjustable door threshold
View Single Post
 
Old 01-15-2023, 08:00 AM
Quent Quent is offline
Member
Join Date: Jul 2015
Posts: 31
Thanks: 686
Thanked 12 Times in 7 Posts
Default adjustable thresholds
Quote:
Originally Posted by villagetinker View Post
I have never seen an adjustable threshold, ours has 4 screws, but these are to hold the threshold down. If you have a gap at the bottom of your door check the rubber sweep, we have had to replace ours. The only other option I can think of is to go to ACE hardware on Wedgewood, as they seem to stock a lot of Village specific parts and may be able to help you. On a side note, one of our thresholds had a rubber gasket between it and the main (wide) threshold. I tried to replace it and could not find the part anywhere, I ended up using a CLEAR silicone between the 2 pieces, which has been working very well.
Not to correct you but there are adjustable thresholds from one Pennsyltuckin to another. Exterior doors only.
I was an installer at one point in time. and I enjoy your spot on advice. Well done.