Quote:
Originally Posted by KsJayhawkers
I have a 2018 Yamaha Drive2. Recently experienced some stuttering on acceleration and a burning smell. Took it on a test drive today and it shifted real hard, almost a pop into gear. Got it home and noticed the spring seat was extremely hot and metal shavings protruding. Any DIYers that like to turn wrenches done a clutch replacement? I am going to try and tackle this on my own and looking for any helpful suggestions on what to look out for.
|
From the looks in the picture there should be a space between the clutch and the housing. Yamaha had problems with the clutch sliding back against the housing and they make a spacer to put in there and solve the problem. You will need a rear clutch puller to remove the clutch then the spacer slides over the input gear and put the clutch back on. Your clutch is most likely OK. Back in the old days it is about a 20 minute job, but I don't do them anymore got too old
Spacer should be available at the Villages golf car store or maybe buggies catalog.