Quote:
Originally Posted by photo1902
My chlorinator has been set on 15% for the past three months. That being said, you should be testing the water weekly to make sure chlorine levels (and the other checks) are ok.
When my salt cell (Turbocell) was suspected to be bad, the tech used a non-working unit, so he could run the system while mine was removed. He dunked my salt cell (still plugged in to the board) into a 5 gallon bucket of pool water, with the chlorinator set pretty high. The result was that there were no signs of life in the water.
|
This is an easy test and I can do this. And we have been weekly water testing at a pool place. Hence the reason we got down to 15%. We were continuously told that we were producing too much chlorine. Tomorrow morning I'll take a 5 gallon bucket full of pool water and stick my salt cell in there and turn it on and see what happens. Very good advice. Thank you