As long as the sink is the same size as the old sink, especially the depth, then the plumbing should be easy enough to DIY. We replaced a kitchen sink and two bathroom sinks, and did the replumbing myself. The piping was pvc, and the differences were minor in that you just dry fit the new piece of pipe and joints until it all aligns correctly, mark it, goop it and replace it exactly where it was dry fit.
A few practice pieces was all i needed to get the hang of gooping and installing. the only part i screwed up on was that i bought the wrong angle joints and had to go back and rebuy the correct ones as that was the ONLY style which HD did not have in stock. .
figures when DIYing
|