Talk of The Villages Florida - View Single Post - Toilet Tip
Thread: Toilet Tip
View Single Post
 
Old 05-20-2024, 01:21 PM
MrChipster MrChipster is offline
Member
Join Date: Jul 2021
Posts: 50
Thanks: 5
Thanked 32 Times in 19 Posts
Default

Quote:
Originally Posted by elevatorman View Post
I used these https://www.homedepot.com/p/BrassCra...X-C1/205214414 From Home Depot. They do not stock the 1/4 turn at the store they only stock full turn which cost less. You can order and have them delivered to the store. Or if your order is larger enough they will deliver to your home. They are not available at Lowes. Someone asked how long does it take to replace. Well what took me the longest time was draining the line. The toilet line is the lowest point in the piping. My suggestion is to shut the water off, open all faucets in the house, flush toilet and remove water from tank with sponge or vac, remove the toilet valves with a pan under each. Go somewhere and relax for awhile when the water stops dripping finish the job. My house had 14 valves and took 4 or 5 hrs to do. You also need supply lines $6 or $7 each. Another hint toilets and ice maker valves are easy. Before you even try to do a sink valve go under your sink and shut off one valve and disconnect a supply line, it is not as easy as it sounds. The older you get your body does not contort to the positions it may need to be in.
Keep the shop vac handy, remember to open the outside valves also and with the toilet valve removed place the business end of the vac over the pipe coming out of wall vacuum the water out. This will save a lot of time, and guarantee no water.


The other way is to have only one other distant valve open and suck the line clear. Assemble the new valve with the vacuum running this is the best way when you need to solder a joint water gets sucked away from the work area.