Quote:
Originally Posted by villagetinker
I actually suspect this may be a larger project then you are thinking. Unless the oven is a smaller unit or the cabinet is much wider than ours I cannot see the oven fitting where you want. Then the oven may require a vent through the roof, check the existing installation for a vent. Then you will need an electrician (or plumber for gas) to move or replace the electrical supply. A picture of what you have would be worth a thousand words in this case.
If you still want to pursue this, I believe there are 1 or 2 custom cabinet makers that MAY be able to come close or if you are really lucky match your existing cabinets.
In any case I think you are looking at a significant expense.
I hope others have alternate ideas on this.
|
I am familiar with the budget required. Saved my pennies to install a professional kitchen in Lebanon, PA 16+ years ago. Hence the movement to upgrade the Village kitchen so I can get cooking. We are second owners of our house built about 2018. Original owners removed the gas stove and put in an electric. Usual overhead microwave. Best Buy had their Black Friday sale and we grabbed a higher end gas oven range, high capacity fan hood, dishwasher, and Advantium wall oven. I have one back north. It is sized to fit a regular 30" wide cabinet. Needs to be at least 36" from floor (countertop height). No vent needed. 220 line. Had one kitchen contractor out twice (at their suggestion). Pike's Electric was out twice... etc...
We even tried talking to cabinet makers here in PA. You are probably familiar with what is in this region.
Would appreciate your referrals.