Quote:
Originally Posted by roadrnnr
I bought my 2023 EFI Gas Drive 2 used
The guy I bought it from had the Gov Zip tied wide open
I cut that off to adjust the nut but seems to get 22-23 I have the nut turned in all the way essentially where it was with the zip tie
I wanted to see if I could get more torque for hills with the Gov functioning which I did not
? is does turning that nut in eventually do nothing after a certain point?
|
Going past the threads will yield very little. If you tighten the nut to the end of the threads, you should get 25-26 mph. However, if you tighten that far, I wouldn't run the cart at full throttle too often, as you significantly increase the probability of causing long term damage. For more torque, you will need to change the spring in the secondary clutch.