My best guess is the feed to the electric panel comes directly up from the slab into the bottom of the main electric panel. Since all electric in the villages is fed underground vs overhead power poles. This is a typical installation. Not famiair with the wall construction, but precast walls would have preinstalled conduits and boxes for outlets & switches. It makes sense that all feeds to outlets & switches would be vertical as well with outside, block or concrete walls being feed from overhead. If you take off the outlet or switch plates you can see where the wire are coming from also look up on the attaic and see along the top of the wall if the feeds to & from outlets from the main panel are being distributed along the top. Good luck.
|