The “usage tracker” on the SECO webpage show the kWhs for the old meter and the new meter for the month of the change over. The total of the two is right around where it should be. The numbers from the new meter going forward are consistent with what we have used in past years. If you haven’t looked at the “usage tracker” on the SECO webpage, I would suggest you give it try. You can obtain usage in as fine a granularity as 15 minutes. You can see when the AC turns on. Perhaps you will gain some insight. If nothing pops out, I would call SECO back and escalate the problem. Good luck.
Quote:
Originally Posted by asianthree
Seco switch in June, only 9 days
Starting full month in July use around 938kWh
August, 1010kW
September 1986kWh
Nothing has changed, in fact we were gone for 5 days. Have gas appliances, and checked AC programming and run time has been constant, with prior months.
Pool hours 1 hour less per day.
Contacted SECO, only answer was i used more kWH. That was a big help.
Any thoughts?
|