Talk of The Villages Florida - View Single Post - Making an Older Yamaha Quieter
View Single Post
 
Old 11-06-2024, 07:14 PM
tophcfa's Avatar
tophcfa tophcfa is offline
Sage
Join Date: Feb 2015
Location: Wherever I happen to be.
Posts: 7,630
Thanks: 3,573
Thanked 11,153 Times in 3,540 Posts
Default

Quote:
Originally Posted by rretzer View Post
I love to tinker with cars and now I have started doing that with my golf cart. It is a 2013 EFI and I want to make it quieter. I love the cart and have no desire to trade/sell it at this point.

My question is, has anyone tried to retro fit it with a few parts from the Quietech models to achieve a similar result? I know it will not be the same but the parts are readily available and not too expensive, seems like a fun project.

I tried searching but I cannot find a thread addressing what I want to try and I thought maybe someone has tried it.
I have basically the exact same cart except it’s a 2014. Don’t ever get rid of it, it’s a great and incredibly reliable cart. I haven’t tried to make it quieter as the noise doesn’t bother me in the least, but I wish it had the rear independent suspension like the Quiet Techs.

Like you, I also like to tinker and would recommend the following projects for your cart.

First and most importantly, change your rear differential oil and use Yamaha Friction Modified gear oil. The cart has wet brakes that are lubricated with the differential oil. The brake system is excellent but does require periodic oil changes.

Check your charging voltage. My 2014 EFI was charging at about 17 volts, which can significantly shorten battery life. If you do a search, Villagetinker started a thread on this with a wiring diagram of how to fix this issue. After his fix the cart now charges at 14 volts.

Replace the brushes in your starter/alternator. They are probably getting close to the wear lines on a 2013. There are YouTube videos that show how to do this.

Think about replacing your secondary clutch, the older clutches are held together with only 4 rivets and can blow out when they get older. The newer 6 rivet clutches are much stronger and more reliable. While you’re doing the project, put a stiffer spring in the clutch and replace the drive belt with a better heavy duty aftermarket belt. Your cart will have much better torque after the fix, which is noticeable going up hills with two passengers and golf bags. This won’t increase your high end speed, just the torque. While you’re doing this, throw in a new starter belt just to be safe. All the parts for this project can be purchased online from powerequipmentman.com.

Ride on : )