Quote:
Originally Posted by pgettinger01
I think in automatic mode you have to have a five (5) degree differential between cool and heat to prevent the HVAC unit from cycling on and off. For example:
Heat 68 and Cool 72
Heat 69 and Cool 73...
If you try to enter something less than five (5) degrees it changes the other setting automatically.
|
I believe this is what " the heat/cool minimum delta " actually sets
If (for example) you set minimum delta to two then you can do (example)
Heat 70 and Cool 72
Heat 69 and Cool 71...
The "delta" value is defining how close together the heat/cool setpoints are allowed to be.
At least on my Honeywell this is the case.
Other values change accordingly.
For example, if you set a delta of two, the "range" must be .5 or 1.
Otherwise the aforementioned back and forth heat/cool issue would ensue.