Thanks good info. I will try Orbi however. 3000SqFt but you make a good point I used Orbi on a multi level, and I still have the router and 2 extenders. But to clarify. I am wondering if they didn't finish something during my build. In my cabinet I had fiber coming in, then going up to the router on the top of the cabinet. At the router was an RJ45 end not plugged in, and in the panel in garage were 6 cut ends. Nothing terminated. I knew I had two more that were supposed to go to Lanai and one going to LR. So you are right that makes 3 left. (and why you only saw 5 in attic) The thing is - I had to test out and terminate the cable to the router to get that connected, I then added a switch in the panel and toned out lanai and LR TV and they are now hardwired fine. So it's strange that they left it all cut unless that is standard at the panel box. And, no rooms have boxes with covers or RJ45 ports anywhere. In any case I think I am just going to use Orbi. I will send a picture once I clean up my panel. It's not as awesome as the one someone posted here - must have been an data center or cable guy! Thank You
|