Ok, finely done. When through every breaker for correct amp outlets and wired correctly using multimeter ensure no stray voltages. Replaced all 15 amp outlets on 20 amp circuit (i know I didn’t have to but outside outlets was really corroded), couple in kitchen so I replaced them also. The outside GFI outlets was really corroded due to originals to house over 22 years old. Tested all outlets to make wired correctly found two that was wired backwards. While I was add it I made diagram of breakers, what amps and what was on that circuit. I also numbered all outlets and switches with corresponding breaker so I know what on circuit. I also found two loose connections during process which could be problems down road that was avoided. Should be good to good for another 20 years?
|