/ by two
Ok here is the schematic this circuit takes in 2 pulses and puts out 1 it is a
/ by 2 setup and will allow speeds of 18 to 21 mph on a stock cart. This circuit is different in the fact that I installed a switch to allow switching between stock and speed mode. Where I live I'm on a hill going down is tricky when in speed mode You Flat Fly no Regen breaking !! so if there are no hills then just forget the switch. I made mine with the stock plugs that the speed sensor has so I (could umm) plug it into a golf cart at the course. Later I just inserted it into the three wire harness in the center control box it was not covered bare board so weather was a factor. I made the test unit on a R.S. circuit board.
|