Directions for programming
I bought a small one and they e-mailed me the process (see below). Here is the information on the cost and how to program it:
DoorRemotesonline Inc
888-341-3003
Allstar 1-Button Mini Remote 9931MT 318MHz
Item #: Allstar 318MHz | 190-109391
$19.95 USD 1 $19.95 USD
Shipping and handling: $7.45 USD
Total: $27.40 USD
First, you will have to get the coding switch sequence from the 9931 transmitter. This will be 9 positions, either +, 0, or – in each position. Write these down in the space provided in the manual on page 3, using 1 for +, 2 for 0, and 3 for – as explained on page 2. Then, reset the Allstar keypad to factory, by pressing the on/reset button, then 999#, 999#. To enter your coding switch sequence, press on/reset, 1234 # # 1, then your coding switch setting (using 1 for +, 2 for 0, and 3 for -), then # again. There should be 9 numbers here. At this time, pressing on/reset 1234 * 1 should operate your door. If it does, then you can program in your new PIN code. Press on/reset, then 1234 # 1 new PIN (4 digits) new PIN again, #. At this time, pressing on/reset, new PIN * 1 should activate your door.
|