Quote:
Originally Posted by Roger Goodman
On Later Yamaha Drive golf carts, one has to remove the entire headlight assembly and loosen the four Phillips head screws on both sides of the headlight. In most cases, the headlights will need a nearly maximum downward tilt to achieve normal forward illumination.
Roger
|
Ours is a 2011 - that's how I adjusted one of ours that needed it.
Remove the two screws on the front of the outer bezel then the entire assembly will pull forward and come out. Don't over-tighten those two when you're all done - they're only threading into the plastic body.
Bill
