Quote:
Originally Posted by BarryRX
I am a bit embarrassed to post this, but I cannot seem to program my sprinkler system correctly. I thought for sure I had it set so that it only waters on Monday (my assigned watering day) at 8PM for 20 minutes per zone. But it went on again yesterday (Friday). Is there a contractor I could call that would come out and program it correctly?
|
Oops, just saw that gryoung posted while I was preparing mine. Here it is anyway.
Chances are you are using more than one program. Program A is all you really need to set up. Check to make sure program B is set at OFF, then check program C and do the same. Here is how to do it: Turn the knob to "Watering Start Times." On the left of the screen should be an "A", "B", or "C". If it's an "A", program in the start time. In your case, 8pm. Touch the "PGM" button and when it is "B" or "C" set each at OFF by pressing + until it reads OFF.
Now go back to RUN, wait a couple seconds and move to SET STATION RUN TIMES. Check to make sure that "A" is in the upper left hand corner of your screen. If not, press PRG until it is. Check to make sure your watering times is set at the times you want.
That should do it.