
07-06-2012, 03:47 PM
|
Member
|
Join Date: Aug 2011
Posts: 59
Thanks: 0
Thanked 0 Times in 0 Posts
|
|
BM
Quote:
Originally Posted by ajbrown
There are two connectors that came with the BM for temperature sensing. One has a ring connector which can be attached to any battery terminal (+ or -) and one does not connect to anything, simply measuring ambient temp. You use one or the other; I used the one that does not connect to anything as it is easier for me. IMO this is 'close' enough for it's purpose.
Here is some general info I saw regarding float voltages some time ago, not specific to the BM...
Deep Cycle Battery FAQ
Last time I looked at my pack with BM attached in 'maint mode' for two days, the pack was at 52.6. I did notice that the individual voltages varied from battery to battery. The lowest was at 6.51 (2.17/cell) and the highest was at 6.75 (2.25/cell). I suspect this difference is telling me something, but it is not clear what and I have not had time to further investigate.
|
May not hurt to equalize the pack someday using a auto charger on the low ones
|