Quote:
Originally Posted by jimbo2012
The gas grill requires a vent hood simple install along with a in ground tank, again simple install.
Sink can be done, here's the issue the drain needs to connect to the sewer line, U don't want to rip up the slab, so my guess is the pipe needs to go around the perimeter of the house and hook up in front where you see a white cap.
The hot & cold water can be routed thru the attic or walls depends on the model U have.
Call 3 plumbers and get costs and ideas.....it can absolute be done.
I see folks paying upto and maybe over 20K to have the builder do it, it just don't cost that much look at it, add up $$$ the appliances the elec and plumbing you have to be able to get it done for $8-12K, but shop trades outside the villages for lower prices.
Remember all the contractors here think we R old and rich.........
If it takes 4 months to put a pool in they must be working part time a few days a week.
A gunite pool should take about 6 weeks.
Now if you really want something to consider look at Sun Pools fiberglass pools install time < 10 days, save about $10,000 ++++
Sun is the company that T&D uses when they install glass pools, less up keep no resurfacing ($6-7,000 in 5 years or so) or leaching of concrete junk in the pool for over a year.
Much easier to clean, comes in many colors & sizes, I have one and know several neighbors that went that route.
|
Jimbo,
I understand the part about running the pipe around the outside perimeter of the house. How would you get it from the lanai? I assume that a wet wall would be built against the side of the lanai. A short run would have to go from the wet wall out to go underground. Would you do this at baseboard level and have a short section visible outside at ground level or would it be feasible to cut a small section of the lanai slab out and patch it after running the drain pipe below floor level? This would mean (I think) cutting into the footer at the edge of the lanai (assuming the lanai has a footer).
Also, what is the size of the propane tank that would be installed? I guess the line to the tank could be run with the drain line.
Don