Quote:
Originally Posted by SouthOfTheBorder
If your dryer vent pipe system was "packed with llnt" within the first three years of use you most likely have a problem with the dryer filter. Modern clothes dryers in proper operating condition will not pack the vent full of lint in three years of use. The condition of your dryer vent you described leaves me 
Just curious, what prompted you make make the decision to have your dryer vent cleaned? How did you choose the contractor you used?
Thanks
Don |
My decision was based on the facts presented in the article posted below and the fact that my home is 3 years old. SureClean Solutions (Doug) was actually a simple selection since we have used this company repeatedly to clean our tile and grout. We knew without question that Doug's crew would have the knowledge and the tooling to do the job properly and professionally.
Sorry that you are confused-can't help you there!!
I watched the entire process out of curiosity and made the "lint" comment based on what I observed.
Actually, whether there was a lot of lint or just a little, I now have "peace of mind" knowing that the vent is clean and clear and working efficiently.
...
The Consumer Products Safety Commission states that “Clothes dryers are associated with over 15,600 fires annually, resulting in 20 deaths and 370 injures”. These fires caused over $100,000,000 in damage.
Why clean your dryer vent? Fires can occur when lint builds up in the dryer or in the exhaust duct. Lint is highly combustible and can block the flow of air, cause excessive heat build-up, and result in a fire.
Although clothes dryers have a lint trap, a significant amount of lint bypasses the trap and finds its way into the dryer and the dryer vent duct. In as little as a year this lint can accumulate to levels that can significantly block the flow of air through the dryer and dryer duct. When you add the warm moist air being discharged into the dryer duct this further helps the lint to start plugging the dryer duct.
Plugged or partially plugged dryer vents can also result in increased operating costs with longer drying times. This will also cause premature failure of components or the dryer. Overheating can also cause unnecessary wear and tear on clothing, thus shorting their life.
In a recent independent study it was found that a load of 7 large bath towels in a dryer with 62.5% vent restriction took 60% more time to dry the same size load and used 77% more energy than the load without the restricted vent.
The following are steps the Consumer Product Safety Commission recommends Homeowners should take to prevent dryer vent fires.
Clean the Lint screen/filter before or after drying each load of clothes. If clothing is still damp when removed after a normal dryer cycle or requires a much longer than normal dryer cycle, this may be a sign the dryer vent needs cleaning.
Clean the dryer vent and exhaust duct (hose connected to the dryer) periodically. Most manufacturers recommend annual dryer vent cleaning for the dryer to work at maximum efficiency.
Check and clean the outside dryer vent exhaust for obstructions and make sure the flapper opens and closes properly. If the flapper is not fully closing, birds and other rodents can nest in the dryer vent line.
Clean behind and around the dryer where lint can build up. Keep the area around the dryer clean and free of lint and clutter.
Replace old style flexible plastic/vinyl hose with corrugated or foil hose. The plastic/vinyl hose is not fireproof and can actually cause a fire to start and spread quicker.
The interior of the dryer chassis should be cleaned by a qualified service person periodically. Lint and debris will build up inside the dryer as well as in the dryer duct.