PDA

View Full Version : Changing from pavers to stamped concrete?


Chazz
02-07-2015, 07:27 PM
Has anyone had experience removing 1" pavers from their driveway and replacing it with stamped concrete?

kcrazorbackfan
02-07-2015, 08:40 PM
Has anyone had experience removing 1" pavers from their driveway and replacing it with stamped concrete?

Are the pavers breaking up on the drive?

Chazz
02-07-2015, 09:33 PM
Are the pavers breaking up on the drive?

Yes.

Bonanza
02-09-2015, 03:37 AM
Stamped concrete is usually done when a new driveway is poured and not as a veneer.

My guess is if you are having a problem with pavers which were added over your concrete driveway, you ultimately will have a similar problem with a stamped concrete veneer breaking up as well. A veneer cannot take the wear and tear of 1" of concrete over your existing driveway, for years and years.

If you are really unhappy with your existing driveway and like pavers or stamped concrete, I'd advise you to rip out your driveway completely and do either treatment from scratch. Either of those as a new treatment will last forever because it is done properly.

gomsiepop
02-09-2015, 08:29 AM
My suggestion is to call someone to assess your particular situation. A great company to deal with is Go Concrete Design. They finished my driveway with stamped concrete and my previous home also. They are a very reputable company to deal with.

villagetinker
02-09-2015, 09:50 AM
Just had our driveway painted/stained and in the discussion with several people that stopped by to see the job, a few with pavers said these are a maintenance nightmare, between cracked pavers and the need to constantly add sand.
Driveways by Jay did our driveway, and we love the design and colors, Jay did a GREAT job. He has done several driveways in the area, and on our street.
As for your problem, I agree with above, you may want to look at having the existing driveway removed, and either a new concrete driveway (painted/stained), or a new cobble stone driveway with the 4 inch paves and a compacted sand base.
Hope this helps, and good luck with your project.

Carla B
02-09-2015, 11:01 AM
This month is the 4th anniversary of our concrete overlay (not stamped concrete)driveway. No cracks so far. There is a small chunk out of the driveway by the street where the original concrete cracked, but it isn't the fault of the overlay. It did have to be recolored and resealed during Year 3, but so do painted driveways. don't they?

tuccillo
02-09-2015, 11:48 AM
Who did your overlay? Thanks.

This month is the 4th anniversary of our concrete overlay (not stamped concrete)driveway. No cracks so far. There is a small chunk out of the driveway by the street where the original concrete cracked, but it isn't the fault of the overlay. It did have to be recolored and resealed during Year 3, but so do painted driveways. don't they?

mulligan
02-09-2015, 12:58 PM
I believe you will find in your deed restrictions that you must maintain a poured concrete driveway, which would preclude a 4" paver on sand drive.

villagetinker
02-09-2015, 01:46 PM
Good point, check the deed restrictions.

Chazz
02-09-2015, 04:06 PM
Thanks to all for the comments!

Carla B
02-09-2015, 06:01 PM
Who did your overlay? Thanks.

Stone Creations did the installation. However, when it came time to reseal, we read the negative comments about them on TOTV and went with Go Concrete instead. We are very satisfied with their service.

JGVillages
02-09-2015, 06:30 PM
A way to extend the life of a paver driveway when the original pavers are no longer available is to take out a 8"x8" or 10'x10' diamond shape in the center. now use these pavers to replace your cracked ones, then replace the diamond with new pavers of a different contrasting color. As always you should sand and seal the driveway regularly to maintain its integrity and reduce the cracking of pavers.

dplars
02-10-2015, 08:55 AM
Just had ours done, I removed the pavers and built/extended the outdoor patio out back, Go-Concrete designs then ground the surface to bare concrete. so far all looks good, love the free hand design that was done. Take a drive by at 1104 Salido Ave. For a successful job, I would think the key is having a clean concrete surface to bond the new materials. We had two cracks diagonal at the end of the driveway. The artisans designed the "flag stone" seams to follow the cracks so if the base made the new covering crack, it would follow/be concealed by the groves in the new design and be easily grouted and stained to blend in with the new design.

Chazz
02-10-2015, 09:07 AM
Just had ours done, I removed the pavers and built/extended the outdoor patio out back, Go-Concrete designs then ground the surface to bare concrete. so far all looks good, love the free hand design that was done. Take a drive by at 1104 Salido Ave. For a successful job, I would think the key is having a clean concrete surface to bond the new materials. We had two cracks diagonal at the end of the driveway. The artisans designed the "flag stone" seams to follow the cracks so if the base made the new covering crack, it would follow/be concealed by the groves in the new design and be easily grouted and stained to blend in with the new design.

Thank you for the info and generous offer to look at your driveway, which I will do, when I am able to travel (recovering from surgery).

Bonanza
02-10-2015, 08:25 PM
This month is the 4th anniversary of our concrete overlay (not stamped concrete)driveway. No cracks so far. There is a small chunk out of the driveway by the street where the original concrete cracked, but it isn't the fault of the overlay. It did have to be recolored and resealed during Year 3, but so do painted driveways. don't they?

Not sure I understand your post. If your existing driveway is concrete, why do you have a concrete overlay that isn't stamped? What is the purpose of your overlay? Was it just to change the color? Couldn't you have simply used a stain as opposed to an overlay? And why do you have to seal it?

dplars
02-11-2015, 08:38 AM
The original painting was done about sixteen years ago and was flaking off, three years ago we had a fly by night local refinish and repaint the surface which also flaked off, plus being stained by our golf cart batteries overflow. Instead of attempting to resurrect the painted surface, we felt it would be wiser to start from scratch and have the paint completely removed and the surface ground down to uncontaminated concrete. Check the classifieds for a weed wacker (recent posting) and you will see the pattern we ended up with. So far, we are pleased with the results.

Bonanza
02-11-2015, 04:25 PM
The original painting was done about sixteen years ago and was flaking off, three years ago we had a fly by night local refinish and repaint the surface which also flaked off, plus being stained by our golf cart batteries overflow. Instead of attempting to resurrect the painted surface, we felt it would be wiser to start from scratch and have the paint completely removed and the surface ground down to uncontaminated concrete. Check the classifieds for a weed wacker (recent posting) and you will see the pattern we ended up with. So far, we are pleased with the results.

Now I get it!
Thanks for your post.

villagetinker
02-11-2015, 04:31 PM
I believe you will find in your deed restrictions that you must maintain a poured concrete driveway, which would preclude a 4" paver on sand drive.

Mulligan is correct, our deed restrictions state "poured concrete", the other projects may have been in other areas of the villages with different deed restrictions. Thank you Mulligan for keeping me honest......