View Full Version : How does the floor look?
jacobariel
08-23-2016, 08:05 AM
I noticed some lippage here and there. Some a credit card thickness and a couple areas 3 credit card thickness.http://uploads.tapatalk-cdn.com/20160823/1dda9d18eecfe0dbf4d2454899130f94.jpghttp://uploads.tapatalk-cdn.com/20160823/f4ed75d8dd61bc8b8bf48b502b2382a7.jpghttp://uploads.tapatalk-cdn.com/20160823/7242b36b28d2bf4601a87f60cdc117ce.jpghttp://uploads.tapatalk-cdn.com/20160823/a06b2ecdfb8d8189cbc394e1346c29d6.jpghttp://uploads.tapatalk-cdn.com/20160823/ca9f29c06ccc864cbaa8cfda475ddb39.jpg
Sent from my SM-G900P using Tapatalk
mulligan
08-24-2016, 06:13 AM
If you have lippage on a new installation, don't pay for it, and have it removed and re-installed properly. There's no excuse for poor workmanship.
jacobariel
08-24-2016, 06:26 AM
If you have lippage on a new installation, don't pay for it, and have it removed and re-installed properly. There's no excuse for poor workmanship.
It's within one to two dimes thick.
Sent from my SM-G900P using Tapatalk
ColdNoMore
08-24-2016, 06:27 AM
You may or may not have a case for the contractor to redo.
If it meets these standards (which are pretty loose), it will be harder to force them to fix it.
Lippage - Floor DetectiveFloor Detective (http://www.floordetective.com/lippage/)
Lippage
The Tile Council of north America defines Lippage as “a condition where one edge of a tile is higher than an adjacent tile, giving the finished surface an uneven appearance. Lippage is inherent in all ceramic installation methods and may also be unavoidable due to the tile tolerances, in accordance with ANSI A137.1. The following is excerpted from ANSI A108.02, Section 4.3.7:
Good luck.
jacobariel
08-24-2016, 06:33 AM
You may or may not have a case for the contractor to redo.
If it meets these standards (which are pretty loose), it will be harder to force them to fix it.
Lippage - Floor DetectiveFloor Detective (http://www.floordetective.com/lippage/)
Good luck.
Thanks. Now as long as it's within a dime or two that's allowed correct?
Sent from my SM-G900P using Tapatalk
Phanatic Luvr
08-24-2016, 07:41 AM
I have a question for you? How long are each of the tiles? I had tile installed which looks like hardwood flooring and although it came in various lengths and widths, Village Flooring told me not to get any longer than 24". They said that due to unevenness of the sub-flooring (concrete), if you go longer, you will always have some that will get lippage.
jacobariel
08-24-2016, 07:42 AM
I have a question for you? How long are each of the tiles? I had tile installed which looks like hardwood flooring and although it came in various lengths and widths, Village Flooring told me not to get any longer than 24". They said that due to unevenness of the sub-flooring (concrete), if you go longer, you will always have some that will get lippage.
It's porcelain 12x24
Sent from my SM-G900P using Tapatalk
Two Bills
08-24-2016, 08:06 AM
I noticed some lippage here and there. Some a credit card thickness and a couple areas 3 credit card thickness.
I would definitely not accept the 3 credit card lippage. That could be dangerous. If that's a new build, accept none of it. JMO.
Phanatic Luvr
08-24-2016, 12:52 PM
It's porcelain 12x24
Sent from my SM-G900P using Tapatalk
Mine is porcelain also but 6" x 24". Yours are double in width. It could be the sub-flooring. It makes the longer tiles see-saw if not perfectly flat. Not sure what they went over in your home. In mine, we had them install a membrane base to the floor first. It was more expensive but we didn't want it to crack if the sub-flooring cracked. That also helped in leveling. Did you have a reputable company put them in? All the installer are usually sub-contractors. I was very lucky to get two separate installers, at different times, which knew what they were doing, thank God.
jacobariel
08-24-2016, 01:51 PM
Mine is porcelain also but 6" x 24". Yours are double in width. It could be the sub-flooring. It makes the longer tiles see-saw if not perfectly flat. Not sure what they went over in your home. In mine, we had them install a membrane base to the floor first. It was more expensive but we didn't want it to crack if the sub-flooring cracked. That also helped in leveling. Did you have a reputable company put them in? All the installer are usually sub-contractors. I was very lucky to get two separate installers, at different times, which knew what they were doing, thank God.
Overall I'm happy with the work. As you can see in the pics it looks good but this is my first time dealing with tile. While not perfect it's a nice floor.
Sent from my SM-G900P using Tapatalk
jacobariel
08-24-2016, 08:05 PM
Quick question. If you get a cell or camera and place it directly on the floor and take a pic straight across the floor in front are you suppose to see only flat tile lines or can there be variation?
Sent from my SM-G900P using Tapatalk
Kup Kake
09-11-2016, 04:56 AM
Lippage is dangerous and a trip hazard. Nickel installed our tile and the job was pretty bad.
They were difficult to deal with.
Kup Kake
10-05-2016, 02:38 AM
We had tile installed everywhere but the bedrooms when we built our house. The tile work was done by a company in Sumter Landing and we had a number of areas where lippage was a problem.
Our lippage problem was a nightmare or I should say dealing with the tile people was. Regardless of how much lippage there is, it is always a trip hazard, especially where older people are concerned,
because many older people do not lift their feet enough when they walk.
If you haven't paid for everything -- DON'T! No matter what you may work out, don't pay until you are completely satisfied, not matter what.
Good luck. You'll need it!
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.