no tail lights

[hoopsterdad]

2017 yamaha, no tail lights. hazards, turns, brake all ok. recently had turn signal/ headlight switch replaced under warranty.

[villagetinker]

There are typically 2 elements, bulbs or strings of LEDS, one for the turn (brake, hazard) lights, and one for the running lights, so you will have 3 wires to each light assembly, ground, turn signal, and running lights. Since the turn signals are working this would indicate you have a good ground connection and turn signal connection. Do all of the front lights (headlights, parking lights) work? If so I would GUESS a broken wire from the back lights to the headlight switch. If none of the lights work, I would check fuses, I think the headlights are fused separately. I think I just downloaded a recent Yamaha instruction manual with the wiring, i will have to check.
Hope this helps.

[hoopsterdad]

checked all fuses i could find with test light, all lights are good except tails. worked until switch replaced. trying to find something simple so i could take to savannah center for new year eves party. will have to take old reliable 2008 cart. calling monday to villages carts. still under warranty. thanks to you.

[villagetinker]

OK, I am guessing a wire was either cut or broken with the switch replacement, since under warranty, they should fix.

[hoopsterdad]

villages discount tech came by yesterday, new switch was bad, installed new one, good to go. did not expect such quick service on new year's eve, good job.