Villages traffic gates

[lholmes]

Can someone explain why you should go through the resident gate instead of the visitors gate if you live in the villages. The visitors side automatically raises up when you pull up to the gate.When you go to the resident side you have to roll the window down and scan your ID card.

[Bogie Shooter]

Use either gate. Solved.

[PugMom]

some visitors may not have a gate key, & some of the work vehicles may be too large to pass, @ least it's that way in ours. (we use the fenney way exit to warm springs from mc clure.) the resident lane is more adjusted to cars, while the visitor lane can allow safe passage for : moving trucks, landscape trailers & other large service vehicles.

[golfing eagles]

Can someone explain why you should go through the resident gate instead of the visitors gate if you live in the villages. The visitors side automatically raises up when you pull up to the gate.When you go to the resident side you have to roll the window down and scan your ID card.

What makes you think the visitor gate goes up "automatically"????????

[photo1902]

What makes you think the visitor gate goes up "automatically"????????

Villages south of 44 still having a fair amount of construction going on will open automatically. It’s been this way for years, presumedly for the large vehicles involved in the construction process.

Perhaps this is what the poster was referring to, as I am not aware of any gates which automatically open. I could be wrong.

[UsuallyLurking]

What makes you think the visitor gate goes up "automatically"????????

Gates have various ways of behaving. One of those ways is construction mode, when there is anticipated to have lots of truck traffic, and the gate opens automatically. I would guess that is the case for this particular gate. Once construction finishes up, I would anticipate it going to normal mode, where visitors would need to press a button to get the gate to open.

[Marathon Man]

Gates have various ways of behaving. One of those ways is construction mode, when there is anticipated to have lots of truck traffic, and the gate opens automatically. I would guess that is the case for this particular gate. Once construction finishes up, I would anticipate it going to normal mode, where visitors would need to press a button to get the gate to open.

OP lives in DeLuna, so this is likely the case.

OP - As a resident, you can use either gate. Do not cross over from the inner lane of a round-a-bout to avoid using the visitors' gate. Many people do this, but it is not good driving.

[OrangeBlossomBaby]

When I'm coming home from outside my neighborhood, I have to take a left after passing the gate. So I stay in the visitor's lane, which is the left lane. If I need to pick up my mail first, I'll go through the residents' gate, which is the right gate. The postal station is down on the right.

[CFrance]

Can someone explain why you should go through the resident gate instead of the visitors gate if you live in the villages. The visitors side automatically raises up when you pull up to the gate.When you go to the resident side you have to roll the window down and scan your ID card.
Not true. Unless you're in a construction area (where TV is building a lot of new homes), you must either use your card or push the red button to get in the visitor's side.

[Northerner52]

It is temporarily in Marsh bend to help the contractors. Wont be forever.
What makes you think the visitor gate goes up "automatically"????????

[RealJudy]

It’s less wear on window motors to use visitor gates when someone is there to open it. Window stickers would be a nice option.

[tsmall22204]

You are not correct. The visitors gate needs a card or push the red button.

[Scott O]

You are not correct. The visitors gate needs a card or push the red button.
Not if there’s a guard shack, they just open it for you ...������

[rmd2]

It’s less wear on window motors to use visitor gates when someone is there to open it. Window stickers would be a nice option.

Yes, especially in the rain.

[jonathanb]

Makes no difference

[FromNY]

Either gate works. If the gate has a person working just smile and wave. No wear and tear on window motor. No need to put window down and let heat, bugs or other in. Usually quicker to get in as well.

[pvetrano1]

Use any gate you want

[pcacace]

It does not go up automatically. Either you push a button or a gate keeper raises it.

[La lamy]

Just as an aside, my resident gate pass works through golf cart plastic 'rain curtains'. Quite handy!

[bonrich]

I wish my card would work that well. There are times when I have to get really close to the control to get the gate up. I wonder if through the years these cards degrade in some way and should be replaced? May have to make a call to find out.

[DecaturFargo]

No it doesn't. Only the outgoing gates both open. If you're entering a Village, you either have tto press the button or use the "key."

[mlmarr1]

If resident lane it backed up..I go through guest lane..keeps traffic moving..


Can someone explain why you should go through the resident gate instead of the visitors gate if you live in the villages. The visitors side automatically raises up when you pull up to the gate.When you go to the resident side you have to roll the window down and scan your ID card.

[Girlcopper]

It’s less wear on window motors to use visitor gates when someone is there to open it. Window stickers would be a nice option.
I doubt the motor will be affected opening your window a couple of times a day. Thats what its made for. Opening n closing! I dont know of any gates that open automaticly without pushing a button or a guard opening it. Except like others said, a temprary thing due to construction.

[Bill1701]

I use whichever gate is less busy.

[PugMom]

I wish my card would work that well. There are times when I have to get really close to the control to get the gate up. I wonder if through the years these cards degrade in some way and should be replaced? May have to make a call to find out.

i thought mine was the only 1, lol. sometimes i have to get right on top of it

[TandHSTAR@AOL.com]

same question. Gate does not go up automatically. Has to be activated my person in gate house.

[Hape2Bhr]

When you go to the resident side you have to roll the window down and scan your ID card.[/QUOTE]

I've been passing through Resident gates with my window up. :a040:

[coffeebean]

It’s less wear on window motors to use visitor gates when someone is there to open it. Window stickers would be a nice option.

I do not roll my car window down to use my gate pass. The pass works through the glass. You just have to get the car close enough to the card "reader". I have no problem doing that.

[coffeebean]

Just as an aside, my resident gate pass works through golf cart plastic 'rain curtains'. Quite handy!

Just as it also works through the glass on a car window.

[Garywt]

You are not correct. The visitors gate needs a card or push the red button.

And you have your picture taken as well.

[JoMar]

Effectiveness of using the cart through glass depends on how close you are willing to get to the scanner. The scanners have limited range so you need to be relatively close. You also need to look at the scanner since a couple of them are at a different height but that is the exception. I hold the card at the the glass and let the car creep, I can hear the beep when it's read but by creeping I don't need to be that accurate :)

[dpmers]

I burned out a window motor after a few years in my Toyota Sienna, so we use visitors where ever they are located

[dadoiron]

Can someone explain why you should go through the resident gate instead of the visitors gate if you live in the villages. The visitors side automatically raises up when you pull up to the gate.When you go to the resident side you have to roll the window down and scan your ID card.
When going in no gate automatically raise to let you in, wrong!
Use whatever you want.

[Jerseygirl08]

Yes, especially in the rain.
I have discovered you can keep your windows up and simply place the card right up against the window, as long as you are close enough to the scanner, and the gate will rise up. Sometimes, you just have to slide the card around to pass the eye of the scanner. I do this when it is cold, really hot, or raining. I also do not want to ruin the motor for the window.

Also, ......... it has occurred to me that the visitor line (if there's a line), goes faster - which is nice for the visitor but if the resident is in a hurry - it can be slightly annoying, Not really a huge deal, in my opinion. I was away from TV for 8 yrs for work and I've been back now, IM A FROG, for 1.5 yrs. and I notice the gate guards are pretty stoic sometimes, barely smile, barely step into the doorway of the shack. Just an observation. Most are eager to talk and chat and smile/wave.

[KristineTVFL]

You have to push the red button to get through on the visitor’s side unless there is an attendant.

[DonH57]

I use the resident's gate because I'm a resident. I don't know about other people's pass cards but I've never had to roll down my window to get my card to work.

[OhioBuckeye]

Can someone explain why you should go through the resident gate instead of the visitors gate if you live in the villages. The visitors side automatically raises up when you pull up to the gate.When you go to the resident side you have to roll the window down and scan your ID card.
As a resident I would use the Visitor gate about as much as the residents gate. Sometimes there would be 5 cars lined up to go thru the residents gate & nobody going thru the visitors gate. Makes sense to me!

[Gullwing]

Back in the day, when the gates automatically opened because of construction, we had friends coming. I told them to drive up to the residence only gate and that I’d programmed their license number in so the gate would open automatically for them.
They were puzzled as to how our system knew their license plate number.
😊

[b0bd0herty]

Can someone explain why you should go through the resident gate instead of the visitors gate if you live in the villages. The visitors side automatically raises up when you pull up to the gate.When you go to the resident side you have to roll the window down and scan your ID card.

Not all of the visitor gates go up automatically. Only those that are placed into construction mode. So if you're in Hawkins, Chitty Chatty, Bradford etc, those do. Most require the button or a card.