View Full Version : Dish TV Help
JSR22
11-12-2021, 09:44 AM
2 of my 3 TVs are not receiving the DISH signal. Looking for a recommendation on who to call to correct input.
sswitenki
11-12-2021, 10:25 AM
If you have Dish tv, call dish and in most cases they can fix while talking online or schedule a service call
Stu from NYC
11-12-2021, 11:05 AM
Call Dish it is their signal
JSR22
11-12-2021, 11:17 AM
Call Dish it is their signal
It's not the signal.It is the input that is incorrect and Ipressed too many buttons.
villagetinker
11-12-2021, 12:53 PM
OP, are you saying that you pressed too many buttons on your TV remote, if so you typically need to go to the MENU, and select the correct TV INPUT.
JSR22
11-12-2021, 01:08 PM
OP, are you saying that you pressed too many buttons on your TV remote, if so you typically need to go to the MENU, and select the correct TV INPUT.
Correct. When I display input it shows blue ray and I can not change it. Very annoying.
DaleDivine
11-13-2021, 06:21 AM
Correct. When I display input it shows blue ray and I can not change it. Very annoying.
Did you try doing a reset on your main control box??
:icon_wink:
Rchamblin1
11-13-2021, 07:15 AM
I have Dish for many years. Call customer service and let them walk you through a quick fix for this.
thevillages2013
11-13-2021, 07:37 AM
Correct. When I display input it shows blue ray and I can not change it. Very annoying.
Unplug tv wait 30 seconds and plug back in
noslices1
11-13-2021, 08:34 AM
Call DISH.
HRDave
11-13-2021, 09:05 AM
Find your original remotes that came with the TVs you’re having the problem with. Use those remotes to change the input signal on them back to the appropriate HDMI input that your satellite receiver is connected to. If the installer changed the HDMI input name to Satellite that makes it easier.
rsmurano
11-13-2021, 12:10 PM
Make sure your tv input is the 1 for dish. You are probably talking about your joeys, so unplug each Joey for 30 seconds and plug back in.
Also, your joeys need a good internet signal, so go to your hopper, hit the home button 2x, go to settings, then internet and then look at your wifi signal. If it’s less than 50, that’s your problem. Your hopper needs a good strong 2.4ghz wifi signal.
The dish tech support doesn’t know anything, I don’t let them touch my dish components
RBW225
11-14-2021, 07:01 AM
This methodology works.
chenault55
11-14-2021, 07:32 AM
Geek Squad if you already a yearly plan.
OhioBuckeye
11-15-2021, 09:26 AM
Isn’t this a pretty silly comment, who do call!
JSR22
11-15-2021, 09:31 AM
Isn’t this a pretty silly comment, who do call!
No. Iwas asking if any Villager experienced the same problem and how they fixed it.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.