MVP Garage Door Openers OUT OF BUSINESS

[Travelhunter123]

I called my Garage Door repair tech, who have used in the past and found to be honest and reasonable, to replace my outside door opener key pad.
He told me that MVP want to have a business and they were used in the villages for about five years on new builds
He said that he can no longer get parts and the only alternative is to get a new garage door opener with a new remote and keypads
I looked on eBay and found some parts available, but not the outside keypad
Has anyone else had this issue and were you able to get parts?

[retiredguy123]

I would suggest calling Ryan O'Cull, 352-207-5668. He may be able to provide replacement parts.

I have not tried to use a universal keypad. But the car I have was programmed by the dealer to operate my garage door with the built-in visor remote. So, I know it is possible to program a non-MVP remote to operate an MVP opener.

[Chellybean]

check your PM

[Bilyclub]

Ryan told me that the MVP Allstar is better than all the newer openers because it’s all metal and built like a tank. It certainly sounds like a tank, but I’ll wait till it dies to replace it.

[villagetinker]

I called my Garage Door repair tech, who have used in the past and found to be honest and reasonable, to replace my outside door opener key pad.
He told me that MVP want to have a business and they were used in the villages for about five years on new builds
He said that he can no longer get parts and the only alternative is to get a new garage door opener with a new remote and keypads
I looked on eBay and found some parts available, but not the outside keypad
Has anyone else had this issue and were you able to get parts?

I believe there is one for sale on this site as i recently helped the owner remove it. Also, please send me a PM so we can discuss over the phone, I have seen problems with the indoor control panel that interferes with the remote controls.

[Stu from NYC]

I called my Garage Door repair tech, who have used in the past and found to be honest and reasonable, to replace my outside door opener key pad.
He told me that MVP want to have a business and they were used in the villages for about five years on new builds
He said that he can no longer get parts and the only alternative is to get a new garage door opener with a new remote and keypads
I looked on eBay and found some parts available, but not the outside keypad
Has anyone else had this issue and were you able to get parts?

Try EBAY, bought one on there a few months ago

[CarlR33]

Silly question but what makes you think the outside keypad is bad? The last one I had up north had a battery inside of it but I have not checked this one yet? I have not experienced one go bad just the battery die or bad code entry?

[Chellybean]

i can help on these MVP allstar openers i hae alot of parts PM me

[DEETAMAC]

i can help on these MVP allstar openers i hae alot of parts PM me

Looking for an Allstar Allister 110838 Deluxe 7 Function MVP Garage Door Opener Wall Control keypad.
Thanks

[Bogie Shooter]

Looking for an Allstar Allister 110838 Deluxe 7 Function MVP Garage Door Opener Wall Control keypad.
Thanks

He said PM me…………

[Topspinmo]

I called my Garage Door repair tech, who have used in the past and found to be honest and reasonable, to replace my outside door opener key pad.
He told me that MVP want to have a business and they were used in the villages for about five years on new builds
He said that he can no longer get parts and the only alternative is to get a new garage door opener with a new remote and keypads
I looked on eBay and found some parts available, but not the outside keypad
Has anyone else had this issue and were you able to get parts?


Yes most parts are obsolete. MVP not all that great anyway cheap entry level. My house over 20 years old and has MVP been around lot longer than 5 years. Basically they got pass by with more quieter better units. Why the can’t compete.

[Bilyclub]

The Allstar MVP was made by Linear who still is in business. They just don’t make the Allstar MVP anymore. It’ll be interesting to see when they start failing in mass numbers between 466 and 44.

[mrf6969]

The communication board went bad in my MVP. Called Ryan and he told me it would be money better spent to replace the whole unit; besides you can't get parts. Ryan told me he was not replacing complete units. He then referred me to Scott's Garage Door Service for a new Chamberlin DC motor MyQ quite unit. Highly recommend Scott's.

[jimhoward]

I am also working on replacing a keypad for an MVP unit. In my case I bought the house from an estate. The battery wasn't changed in who knows how long and the acid rotted the unit hopelessly.

I agree you can't get parts, or at least not that part. Not available on amazon, ebay, or any on-line garage door opener parts supplier.

However, a universal keypad should work provided it can operate at 318 MHz (some do, many don't, its old technology). I tried one , made by LOWOHO corporation and could not get it to work. Now I have purchased a unit from LPWPK corporation. If it works (or doesn't) I will post the result. I think it is probably a matter of stumbling upon the right asian manufacturer.

[Chellybean]

Contact me private message my husband has all part and also can repair them too. Including communication cards,wall stations and 3 button remotes

[Jim1mack]

You can find the remotes on EBay.

[JoMar]

I found an obscure source...Amazon.com :). Bought an outside replacement keypad 2 years ago, easy install, and has been working fine ever since.

[Plinker]

Can the keypad be replaced by a simple key switch? We had a home that we installed a key switch and it worked great.

[bilcon]

The Allstar MVP was made by Linear who still is in business. They just don’t make the Allstar MVP anymore. It’ll be interesting to see when they start failing in mass numbers between 466 and 44.

I just had my son-in-law take apart my two MVP indoor openers and clean the contacts. They were black and he took a pencil eraser and cleaned them . The openers work great. Took him about 10 minutes to do each one.

[Chellybean]

I just had my son-in-law take apart my two MVP indoor openers and clean the contacts. They were black and he took a pencil eraser and cleaned them . The openers work great. Took him about 10 minutes to do each one.

they used the mvp right to Fenny

[mecaneck]

i can help on these MVP allstar openers i hae alot of parts PM me

Looking for a motor control board #111068 / new or used Allstar MVP opener// mecaneck1@aol.com

[Chellybean]

Looking for a motor control board #111068 / new or used Allstar MVP opener// mecaneck1@aol.com

check your PM

[Sage327]

Does the replacement unit by Linear have a “seek” mode for the keypad and remotes?

[Sage327]

I just had my son-in-law take apart my two MVP indoor openers and clean the contacts. They were black and he took a pencil eraser and cleaned them . The openers work great. Took him about 10 minutes to do each one.

Thanks do much for that tip!
I just did same per your instructions and the wall control panel is working like new.
We were jabbing at those buttons five times to get them to work now it's just a touch!

Great tip!

[mrkorn12@aol.com]

i can help on these MVP allstar openers i hae alot of parts PM me

Do you have any Wall Controls? My e-mail is: mrkorn12@aol.com. Thanks, Manny

[Scdet]

Need my remote and keypad programed, 3057440554