MVP Touch pad in the garage

[billethkid]

The touch pad in the garage is not functioning consistently.....have to press up/down arrow more than once (to find spot that works).

Are MVP replacements available?

Can any brand touch pad replace the MVP unit?

Thanks.

[Bogie Shooter]

The touch pad in the garage is not functioning consistently.....have to press up/down arrow more than once (to find spot that works).

Are MVP replacements available?

Can any brand touch pad replace the MVP unit?

Thanks.

Some info here…
https://www.talkofthevillages.com/forums/villages-florida-general-discussion-73/all-star-mvp-garage-door-outside-keypad-354750/?highlight=door+opener

[billethkid]

I am looking for the indoor touch pad.

[CarlR33]

A picture would be most helpful as I would have also assumed you meant the keyboard one outside.

[blueash]

You might want to check this old post on how to clean the contacts.

https://www.talkofthevillages.com/forums/villages-florida-general-discussion-73/mvp-garage-door-opener-337771/?highlight=wire#post2171122

[Win1894]

If you plan on staying in your home for some time you might want to consider replacing your MPV system. The MPV openers just seem to wear out after 10 - 15 years no matter how many times you clean the contacts etc. I've replaced 5 of them for friends and neighbors in the last two years. This is in addition to my own when, out of nowhere, my neighbor's remote started opening my garage door. Changing the DIP switch settings did not help. New belt drive system is so much nicer (quiet and reliable).

[Paul Verciglio]

You can buy a replacement on Rolling Acres Road. It’s located at the very back of the area where you will see all the wooden roof trusts. It is on the right hand side of Rolling Acres as you are driving to 441-27

[guitarguy]

Change the battery before, make sure it’s not the problem

[bikeman]

I just had the same issue...you do not need a new touch pad, just call
Ryan O'Cull. 352-617-0522
He will charge you $65 for a service call, all mine needed was a good cleaning of the circuits on the inside of the unit...took him 10 minutes to clean them and now they work like new...

[Astropoint]

The touch pad in the garage is not functioning consistently.....have to press up/down arrow more than once (to find spot that works).

Are MVP replacements available?

Can any brand touch pad replace the MVP unit?

Thanks.
The door is operated by a simple contact closure. Just mount a doorbell switch next to it.

[retiredguy123]

The door is operated by a simple contact closure. Just mount a doorbell switch next to it.
I would be careful about that because it doesn't have an emergency "stop" button, which is a safety feature on the wall pad.

[Astropoint]

I would be careful about that because it doesn't have an emergency "stop" button, which is a safety feature on the wall pad.
A simple second press stops the door and a third press reverses the door.

[PoolBrews]

I have one available to sell if you're interested.

[jarodrig]

You can buy a replacement on Rolling Acres Road. It’s located at the very back of the area where you will see all the wooden roof trusts. It is on the right hand side of Rolling Acres as you are driving to 441-27

Not anymore ….

That system has been discontinued and parts are no longer available.

OP may be able to find a used one on the net ….

[Wondering]

the touch pad in the garage is not functioning consistently.....have to press up/down arrow more than once (to find spot that works).

Are mvp replacements available?

Can any brand touch pad replace the mvp unit?

Thanks.
there aren't any replacements online. Some say take it off the wall and clean the connection with alcohol. It should work.

[Driller703]

The touch pad in the garage is not functioning consistently.....have to press up/down arrow more than once (to find spot that works).

Are MVP replacements available?

Can any brand touch pad replace the MVP unit?

Thanks.
Try new batteries.

[dougawhite]

Look through these on ebay. One should work as a replacement.

https://www.ebay.com/sch/i.html?_nkw=Mvp+garage+door+opener+inside+control+ panel+replacement&_trksid=m5467.l1311

[retiredguy123]

Try new batteries.
I don't think the wall pad uses batteries.

[Rodneysblue]

The touch pad in the garage is not functioning consistently.....have to press up/down arrow more than once (to find spot that works).

Are MVP replacements available?

Can any brand touch pad replace the MVP unit?

Thanks.
Happened to me once. I accidentally nudged the lock button and would not allow the door to go up or down, double check your lock button.

[Astropoint]

Here’s a pic with an extra button next to door opener. Just bridge the two wires across the existing wires on the opener.

[PoolBrews]

Try new batteries.

There are no batteries in the wall unit.

[Bob45]

The touch pad in the garage is not functioning consistently.....have to press up/down arrow more than once (to find spot that works).

Are MVP replacements available?

Can any brand touch pad replace the MVP unit?

Thanks.

I have a touch pad, door safety lights and 3 remote openers for sale. PM me. Bob

[nn0wheremann]

The touch pad in the garage is not functioning consistently.....have to press up/down arrow more than once (to find spot that works).

Are MVP replacements available?

Can any brand touch pad replace the MVP unit?

Thanks.
You probably just need to remove it from the wall, take it apart, and clean the pad with a q-tip and some rubbing alcohol. Reassemble and remount on the wall. Should take about 20 minutes.

MVP was an odd-ball brand. They did not use the industry standard frequency for their transmitters so none of the commonly available replacements work with MVP systems. Mine lasted about 20 years, went through one start capacitor replacement ($25 at Granger in Ocala), and eventually the motor wore out.

I replaced it with a Chamberlain from Amazon. Installation was not much trouble. The new ones are much lighter. I had to buy a length of perforated steel bar from Ace hardware and cut two seven inch sections to extend the mounting bracket to mate with the old MVP bracket on the garage ceiling.

[drmatt1098]

I have one available to sell if you're interested.
Is the one you have available an indoor wall mount that allows for programming the code on a new remote?