Metal Baker's Rack

[kmspla1952]

I bought a metal baker's rack at an estate sale and was wondering if it is possible to remove the soldered on wine/glass/stemware holders. Sawz-all? Suggestions please.

[Pondboy]

Hard to say without seeing it….some sections might help form / support the structure.

But, yes, you could with a sawzall and a blade designed for cutting metal. Best to wear eye protection and a good dust mask. Some solder contains lead.

[villagetinker]

I bought a metal baker's rack at an estate sale and was wondering if it is possible to remove the soldered on wine/glass/stemware holders. Sawz-all? Suggestions please.

Probably, but I would need to see the rack, I have several tools to remove metal. These will typically need to sawed or ground off as these are typically welded, send me a PM with your phone number and we can get together.

[Topspinmo]

I bought a metal baker's rack at an estate sale and was wondering if it is possible to remove the soldered on wine/glass/stemware holders. Sawz-all? Suggestions please.

Picture would be nice. IMO depends on how thick metal is and how strong? May Cut just using side cutter, bolt cutter, hack saw, grinding wheel? Usually made of mild steal (like coat hanger) easy to cut?

[MarshBendLover]

angle grinder with metal wheel or dremel for small stuff. Add a pic.