PDA

View Full Version : Replacing light and fan switches to dimmers and fan controls


upstate
06-30-2013, 10:17 AM
Looking to replace existing overhead light switches with dimmers and fan switches with fan controls (low, medium and high). Any info appreciated, thanks.

rayschic
06-30-2013, 10:24 AM
Here's a link to how to install a dimmer switch. It's really a pretty easy DIY job.
Just pick up a dimmer switch from Home Depot.

Project Guide: Installing a Dimmer Switch (http://www.homedepot.com/webapp/catalog/servlet/ContentView?pn=Installing_a_Dimmer_Switch)

mulligan
06-30-2013, 10:26 AM
Just be sure to buy a dimmer with an adequate rating for the appliance. Too small, and it will create excessive heat.

JerryP
06-30-2013, 12:14 PM
If you're using a compact fluorescent light bulb (CFL), make sure you get one that is labeled as “dimmable.” Ordinary CFLs will not work with a dimmer.

upstate
06-30-2013, 03:07 PM
Thanks for the info, I was actually looking for someone to do it.

rayschic
06-30-2013, 08:38 PM
Thanks for the info, I was actually looking for someone to do it.

Check this older thread which gives recommendations for 2 reasonably priced electricians.
https://www.talkofthevillages.com/forums/contractors-services-91/need-electrician-ceiling-fan-77150/

upstate
06-30-2013, 09:46 PM
Check this older thread which gives recommendations for 2 reasonably priced electricians.
https://www.talkofthevillages.com/forums/contractors-services-91/need-electrician-ceiling-fan-77150/

Thank you.