![]() |
AC kicking on
AC is kicking on when house temp is below thermostat setting- any ideas why?- thank you
|
It could just be the fan trying to draw down the humidity. The ac will also drive a degree or two below set point so it’s not cycling on and off all the time.
I’m guessing you’re in a new house? lol f so make sure to schedule the walk through with the AC contractor. They’ll run through the system with you and probably tweek a few things. |
Humidity perhaps.
|
thanks- even with no humidistat or dehumidifier installed-?
|
Quote:
|
Quote:
|
thanks to all for the quick responses
|
You have had a rough day getting stuck at home garbage now A/C.
|
Of course there's humidity control....
Quote:
If it's raining outside it's 100 percent humidity. The ac removes humidity out of the air and makes it seem cooler(think of perspiration evaporation as it's how the human body cools itself). So while it seems the ac is running it's likely the fan drawing in humid air and removing some of that dampness. |
Note that the optional humidity setting on your HVAC thermostat will attempt to lower the humidity in your house by running the AC longer than it needs to run to satisfy the temperature setting. So, it will remove extra moisture from your house by reducing the temperature to about 3 degrees below what it is set for. You can set the temperature to 72, but, when the humidity is high, you will actually get a temperature of 69. This is a good feature for snowbirds when the house is not occupied because it allows you to set the temperature to a higher setting (about 80 degrees) and save on electricity. When the humidity goes up, the AC will automatically run longer to reduce the moisture in your house. But, when the house is occupied, the optional humidity setting may make the house uncomfortable because it will get too cold when the humidity goes up. So, I recommend turning on the humidity control only when the house is unoccupied. Just my opinion.
|
Quote:
|
Quote:
|
We keep our humidity set at 55% year round. The last thing we want is a mold problem. When we are there the temp is set to 70 but we are not there much.
|
It’s bringing the humidity down.
|
Quote:
|
All times are GMT -5. The time now is 11:58 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Search Engine Optimisation provided by
DragonByte SEO v2.0.32 (Pro) -
vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.